PA audio Speaker Cd4402/speaker system/New product

*1 inch exit throat/120 W continuous program power handling *106 dB sensitivity 1w/1m *900Hz~20kHz frequency range

*Polymer diaphragm

*44mm(1.7²) edgewound Aluminum voice coil*Aluminum rear cover*optimized geometry phase plug

SPECIFICATIONS

General Specifications3
Throat Diameter	25.4/1	inch
Rated Impedance	8	ohm
Power bandling(1.0k-18kHz)  Nominal2  Continuous Porgram3	60 120	WattsWatts
Sensitivity4(lw/lm,on axis,on horn)	106	dB
Frequency Range5	900~20k	Hz
Minimum Impedance(Zmin)	7.6	ohm
Voice Coil Diameter	44/1.7	inch
Voice Coil Material	Edgewound Aluminum
Voice Coil Winding Former	Kapton
Phase Plug Material	Comoisute
Diaphragm Material	Polymer
Flux Density	1.5	T
Magnet Material	Ceramic

 

Mounting Information
Overall Diameter	101	mm
Overall Depth	62	mm
Net Weight	1.8	mm
4xM6 holes, 90Deg on 100mm diameter

NOTES:

1. Driver mounted on H215 horn. 2. 2 hours test made with continuous pink noise signal(6dB creast factor) within the    specified  range.3. Continuous Program Power is defined as 3dB greater than the AES power.4. Sensitivity is measured at 1W input on rated impedance at 1m on axis from the mouth    of a horn and averaged between 1kHz and 4kHz.5. Frequency range is defined as the band of frequencies  delineated  by the lower and    Upper limits where the output level drops by 10dB below the rated sensitivity. 

PA audio Speaker Cd4402/speaker system/New product