Audio Speaker CD7401/pa loudspeaker/HF DRIVER

1.5 inch exit throat 180 W continuous program power handling 110dB sensitivity 1w/1m Titanium diaphragm

* 75mm(3") edgewound Aluminum* Aluminum rear cover* optimized geometry phase plug

SPECIFICATIONS

General Specifications3
Throat Diameter	1.5	inch
Rated Impedance	8	ohm
Power bandling(1.0k-18kHz)  Nominal2  Continuous Porgram3	90 180	WattsWatts
Sensitivity4(lw/lm,on axis,on horn)	110	dB
Frequency Range5	500~20k	Hz
Minimum Impedance(Zmin)	7.9	ohm
Voice Coil Diameter	3	inch
Voice Coil Material	Edgewound Aluminum
Voice Coil Winding Former	Kapton
Phase Plug Material	Comoisute
Diaphragm Material	Titanium
Flux Density	1.5	T
Magnet Material	Ceramic

 

Mounting Information
Overall Diameter	169	mm
Overall Depth	63.5	mm
Net Weight	4.5	mm
4xM6 holes, 90Deg on 100mm diameter

NOTES:

1. Driver mounted on H225 horn.

2.hours test made with continuous pink noise signal(6dB creast factor) within the

    specified  range.

3. Continuous Program Power is defined as 3dB greater than the AES power.

4. Sensitivity is measured at 1W input on rated impedance at 1m on axis from the mouth

    of a horn and averaged between 1kHz and 4kHz.

5. Frequency range is defined as the band of frequencies  delineated  by the lower and

    Upper limits where the output level drops by 10dB below the rated sensitivity.

Audio Speaker CD7401/pa loudspeaker/HF DRIVER